Laminating Debubblers One machine KT-103

Laminating Debubblers One machine KT-103

Product Name:KT-103
This is a newest upgrade 15 inch laminating debubbler in one machine.Built-in air compressor and vacuum pump.
Laminating and bubble remove only one step,100% no bubbles.

Operating steps:
1.Plug in power line,turn on the power switch.
2.Adjust laminating pressure to 0.5Mpa.
3.Touch system start,click"setting".
4.Set the "vacuum time" to 15S,"laminating time" 25S,"Debubble time" 5-10M,"Laminating debubble temp"40 degree,Click"comfirm",Click"automatic" preheat.
5.Open the machine cover lid,tear off the oca protect film.
6.Put the glass on lcd,then use one finger click the middle screen softly.
7.Put it to laminating area in order,close the cover lid,Tighten the screws.
8.Click “ start ”,vacuum air-removed start,Tighten the scews again .
9.It will turn to bubble remove mode after 25 seconds automaticly,it will automatic exhaust after debubble.
10.Loosen the screws,Take out the screen.


SUPPLY:    AC220V/AC110V
POWER:     800W
SIZE:      420*350*330MM
WEIGHT:    32.2KG




เขียนข้อคิดเห็น

หมายเหตุ: ไม่รองรับข้อความที่มีรูปแบบ เช่น HTML PHP Javascript
    แย่           ดี

  • Views: 1520
  • ผู้ผลิต: Kaisi
  • รหัส/รุ่น: KT-103
  • สถานะสินค้า: 100
0 Product(s) Sold